Specifications

NEW!



OWS
KITS

OIL/WATER SEPARATOR KITS

Specifications

Air Options OWS series oil/water separators are extremely simple to assemble, install and operate.

The condensate is introduced into the input port at the top of the drum and then collects in the drum where the oil is allowed to separate and float to the top of the reservoir.
The clear water settles to the bottom of the tank and enters the take up tube.
As the clear water seeks its own level with the surrounding water, it travels up the tube and drains through the water output port.
The clear water then flows down through the post-filter and is discharged through the water output port.

In most cases, the water discharged from OWS series oil/water separators may be dumped directly into any storm or sanitary sewer system without concern.

    Specifications:    OWS-4          OWS-9

           HP Range:       1/2-50            60-200
                 Height:     32.00"            39.00"
                   Width:      25.00"            27.00"
                   Depth:      20.50"            24.50"
   Weight (Empty):      13 lbs.            22 lbs.
24 Hr. Throughput:      24 Gal.           50 Gal.
                  Input:           3/4" (F) NPT
         Output:           3/4" (M) GH
Post Filter:               Granular
Media Charge:                 1 lbs.
          Filtration:         < 10 PPM Oil

<< See Below for Cut-Away View >>

View our other products at
www.Air-Options.com